Nortel Networks Passport 4430 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach IP-Zusatzmodule Nortel Networks Passport 4430 herunter. Nortel Networks Passport 4430 User's Manual [en] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
1
210140-A Rev 00 May 2000
Passport 4430, 4450 and 4455
Installation Instructions for the Release 4.0, 16 MB Flash Memory
This instruction sheet will guide you through installing the Release 4.0, 16 MB
Flash Memory SIMM in the Ethernet Base Module (EBM), of the Passport 4430,
4450 and 4455. This SIMM includes the Release 4.0 boot code.
There are two SIMMs that can be used to upgrade the Passport:
16 MB Flash SIMM (NTJ778AA) - used in the Passport 4430/4450
16 MB Flash SIMM (NTJ779AA) - used in the Passport 4455
Note: Both SIMMs are identical in appearance; be sure to check the
PEC number (NTJxxxAA) that is printed on the label to
ensure you have the correct SIMM for the EBM you are using.
If the incorrect SIMM is used, the system will not work.
1. Remove the power from the unit.
2. Remove the four (4) cover screws
(two (2) on each side of the unit).
3. Slide the cover toward the rear of
the unit and lift off.
4. Disconnect any external cables
that may be connected to the
unit, and remove any expansion
module rear panels and blank
panels (if no expansion modules
are present, proceed with step 6).
Caution:
!
The Passport contains electrosensitive components which may
suffer damage due to static discharge. Either wear a grounded wrist
strap or ground yourself by touching the chassis.
Cover
Screw (4)
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Passport 4430, 4450 and 4455

1210140-A Rev 00 May 2000Passport 4430, 4450 and 4455 Installation Instructions for the Release 4.0, 16 MB Flash MemoryThis instruction sheet will gui

Seite 2 - '5F

Release 4.0, 16 Mbyte Flash Memory Installation Instructions 2'5F5. Remove the expansion modules by following this procedure:a. Tak

Kommentare zu diesen Handbüchern

Keine Kommentare