Nortel Networks Optivity Switch Bedienungsanleitung PDF herunterladen (Seite 167)

Chapter 7 Using Log Manager 167

Using Optivity Switch Manager, Release 1.1.0.0

Figure 80 Copy File tab

2 Enter the source address of the syslog file.

3 Enter the destination address of the syslog file.

4 Select the start radio button.

5 Click Apply.

Uploading a file using the CLI

If remote access to the CLI is enabled for a switch, you can access the CLI

remotely to upload files. This section describes how to use Telnet to access the

CLI and copy a file to your management station.

You can initiate a Telnet session from Device Manager or you can use Telnet

software installed on your management station. After the Telnet session is active,

you log on to the switch and use the

copy command to upload the file.

Initiating a Telnet session from Device Manager

To initiate a Telnet session from Device Manager:

1 On the Device Manager toolbar, click the Telnet icon.

The Telnet dialog box opens showing the CLI login prompt for the selected

switch (Figure 81).

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 191 192

Keine Kommentare

Nortel Networks Optivity Switch Bedienungsanleitung Seite 167