Nortel Networks 10BASE-T Bedienungsanleitung PDF herunterladen (Seite 272)

Using the BayStack 410-24T 10BASE-T Switch

3-130

309985-C Rev 00

Logout

The Logout option (accessed from the main menu) allows a user working at a

password-protected console terminal or in an active TELNET session to terminate

the session.

The Logout option works as follows:

• If you are accessing the BayStack 410-24T switch through a TELNET

session, the Logout option terminates the TELNET session.

• If you are accessing the BayStack 410-24T switch through a

password-protected console terminal (connected to the console/comm port on

the switch), the Logout option displays the console-terminal password prompt

(Figure 3-57

). If RADIUS authentication is enabled, the password field is

preceded by a username field. You must enter the correct password (and

username, if applicable) to access the CI screens.

Figure 3-57. Password Prompt Screen

You can specify whether a password is required for the TELNET session or the

console terminal using the Console/Comm Port Configuration screen (see

“

Console/Comm Port Configuration” on page 3-94).

If the console terminal is not password protected, the system ignores the Logout

option.

BayStack Model 410-24T HW:Revx FW:Vx.xx SW:Vx.x.x.x

Password: [ *************** ]

Enter Password:

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 329 330

Keine Kommentare

Nortel Networks 10BASE-T Bedienungsanleitung Seite 272