Nortel Networks V210 Bedienungsanleitung PDF herunterladen (Seite 123)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide

123

2 Use the values from the table that follows to complete the

Database Base tab parameters.

The shaded rows indicate values that must be addressed by the

installer.

3 Use the values from the table that follows to complete the

UNIStim Base tab parameters.

Phase 1 Firmware ID B60 default

Phase 2 Firmware ID D61 default

Use UFTP checked Box is checked. default

UFTP Server Port 50020 default

Keep Alive Timer 40 default

KA Phone Timer 90 default

Switch Server Delay 5000 default

Min ReReg Delay 60000 default

Max # Reg Attempts 25 default

Server Recovery

Time Min

1 default

Server Recovery

Time Max

5 default

Table 17 IP Client Manager tab (Sheet 2 of 2)

Parameter Recommended Value Notes Example

Table 18 Database Base tab

Parameter Recommended value Notes Example

Primary Host <machine logical IP address of

the primary database server>

120.120.13.22

Connections 5 default

Secondary Host <blank> Leave blank default

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 175 176

Keine Kommentare

Nortel Networks V210 Bedienungsanleitung Seite 123