Nortel Networks V210 Bedienungsanleitung PDF herunterladen (Seite 41)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide

4 Enter a new user password at the Enter your NEW

password: prompt. The password will be displayed as

asterisks.

5 Re-enter the new user password at the Re-Enter your NEW

password: prompt. The password will be displayed as

asterisks.

6 To change the superuser password for the unit, do the following:

a Access the Configuration Command Mode.

b Enter the password command at the Config:0 >> prompt.

c Enter a new superuser password at the Enter your NEW

password: prompt. The password will be displayed as

asterisks.

d Re-enter the new superuser password at the Re-Enter

your NEW password: prompt. The password will be

displayed as asterisks.

Procedure 8 Accessing the MRV LX terminal server

At the management pc,

1 Select Start -> Programs -> Accessories -> Communications

-> HyperTerminal.exe

2 Name the HyperTerminal Session: termserv [Enter]

3 Ensure that the appropriate COM port is set and that the terminal

emulation is set to VT100.

Note 1: You may be asked for the following parameters:

• 9600 baud rate

• 8 data bits / second

• parity - None

• stop bit - 1

• Flow control - None

Note 2: Press Enter until you receive a log-in prompt. You

may need to press Enter several times before the prompt

appears.

4 Log in to the HyperTerminal: access [Enter]

Note: The letters do not appear when you type them. You are

typing them in blind.

5 Enter your username: admin [Enter]

6 To change security at the prompt, type set priv [Enter]

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 175 176

Keine Kommentare

Nortel Networks V210 Bedienungsanleitung Seite 41