Nortel-networks M3310 Bedienungsanleitung Seite 114

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 264
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 113
114 Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager Standard 2.1
Before you begin
This section describes the configuration settings that apply to Digital Telephone
IP Adapter units. If you need remote serial access to Configuration Manager, use
a remote management software application.
Note: Nortel recommends that you use the telephone set menu to perform the
initial configuration for the Digital Telephone IP Adapter unit. Refer to Chapter
4, “Configuring the IP Adapter unit using the telephone menu.” Once
configured, you can then use the Configuration Manager for changes,
administration, and firmware upgrades. For a more detailed description of
Configuration Manager, refer to the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210).
ATTENTION!
After initial configuration with the telephone set menu,
complete all Digital Telephone IP Adapter configuration
using Configuration Manager. Use the man-machine
interface (MMI) only with the assistance of technical
support personnel for troubleshooting and diagnostic
testing.
Seitenansicht 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 263 264

Kommentare zu diesen Handbüchern

Keine Kommentare