Nortel Networks BCM200 Bedienungsanleitung PDF herunterladen (Seite 202)

202 Chapter 16 Using Element Manager to set the basic parameters

N0060612N0060612

5 Configure the attributes for Modify SNMP Settings (see Table 73).

6 Click Ok.

To configure SNMP community strings

1 From the Configuration tab, click the Administrator Access folder to expand it.

2 Select SNMP from the Administrator Access folder.

3 Select the Community Strings tab.

4 Click Add.... The Add Community String dialog box opens.

5 Configure the Add Community String attributes (see Table 74).

6 Click Ok.

7 Repeat steps 4 to 6 to add more community strings.

To configure the SNMP manager list

Use the SNMP manager list to specify IP addresses that are allowed to connect to the SNMP agent.

1 From the Configuration tab, click the Administrator Access folder to expand it.

2 Select SNMP from the Administrator Access folder.

3 Select the General tab. It is normally selected by default.

4 Click Add... in the SNMP Manager List area. The Add Manager dialog box opens.

5 Enter the IP address in the Manager IP Address field.

6 Click Ok.

7 Repeat steps 4 to 6 to add another manager IP address.

Table 73 Modify SNMP Settings attributes

Attribute Description

Enable SNMP Agent Select whether to enable or disable the SNMP agent by selecting (or not

selecting) the check box.

Minimum required security Select the minimum required security for SNMP from the drop-down list.

SNMP Version Support Select the SMNP version support from the drop-down list.

Table 74 Add Community String attributes

Attribute Description

Community string Enter the entry name used as a key to uniquely identify an individual

community entry on the SNMP agent.

Type of access Specify the read and write access for this community. Available options are

Read Only and Read/Write.

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 381 382

Keine Kommentare

Nortel Networks BCM200 Bedienungsanleitung Seite 202