Nortel Networks Network Card 4400 Bedienungsanleitung PDF herunterladen (Seite 48)

Chapter 5 Accessing the CLI and Basic Configuration

209664-A

Use the following CLI command to assign the IP address:

CLI> add ip address entry

Example:

CLI> add ip address entry 3 192.168.22.22 255.255.0.0 192.168.255.255

Save the configuration and reset the unit.

CLI> save configuration update

CLI> reset system current reset

Parameter Range of Values Required Actions

<IfIndex> INTEGER (1..255) Enter the IfIndex of the Interface

displayed in Step .

<IPAddress> IPAddress Enter the IP address you want to

assign the Passport 4460.

<NetMask> Sub-NetMask

(255.255.255.0,

255.255.0.0, or

255.0.0.0)

Enter the subnet mask. The bits of the

subnet mask are set to 1 if the

Passport 4460 should treat the

corresponding bit in the IP address as

part of the IP network prefix.

<BcastAddress> IPAddress The IP address used for broadcasting.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 73 74

Keine Kommentare

Nortel Networks Network Card 4400 Bedienungsanleitung Seite 48