Nortel Networks Network Card 4400 Bedienungsanleitung PDF herunterladen (Seite 69)

Appendix B Installing System Software from the CD-ROM

Getting Started with Passport 4400, Release 4.1

CLI Procedure for Downloading Application Software

Load the Passport 4460 Release 4.1 software onto your TFTP server (boot and

application code as required).

Access the CLI (it may be necessary to do this through a Telnet session).

Download the boot code (if necessary). Otherwise, skip this step.

Example:

Download base image specific 192.168.15.30 “bt41xxxx.bld”. This will

download the file bt41xxxx.bld from the TFTP host with the IP address

192.168.15.30 (where x’s represent the current version/filename).

Download the Release 4.1 application code onto the Passport 4460 unit using

TFTP.

Commit the application code bank that will be write-protected during the

download

Example:

CLI> set system firmware commitcodebank bank 1

This will write-protect application code bank 1. The application code will

be downloaded into bank 2.

Download the application code,

Example:

CLI> download base image specific 192.168.15.30 “pr41xxxx.bld”

This command downloads the file pr41xxxx.bld from the TFTP host

whose IP address is 192.168.15.30 (where x’s represent the current

version/filename).

Commit the new application software to the write-protected bank.

Example:

CLI> set system firmware commitcodebank bank2

1 2 ... 64 65 66 67 68 69 70 71 72 73 74

Keine Kommentare

Nortel Networks Network Card 4400 Bedienungsanleitung Seite 69