Nortel Networks Nortel Secure Network Access Switch 4050 Bedienungsanleitung PDF herunterladen (Seite 518)

518 Chapter 10 Configuring system settings

From the selected static route screen, complete the following tasks as necessary:

• “Adding a static route” on page 518

• “Removing a static route” on page 519

Adding a static route

To add a static routes, perform the following steps:

1 Select the static route from the table.

2 Click Add.

The Add Route dialog box appears (see Figure 139).

3 Enter the static route information in the applicable fields. Table 101 describes

the Add Route fields.

Add Route fields

Field Description

Destination Address Specifies the static route destination IP address.

Netmask Specifies the network mask to apply to the IP address.

Gateway Specifies the IP address on the core router.

Note: When you add a static route to the system, host, or interface

configuration, the route is automatically assigned an index number.

There are separate sequences of index numbers for routes configured for

the cluster, for each host, and for each interface.

Keine Kommentare

Nortel Networks Nortel Secure Network Access Switch 4050 Bedienungsanleitung Seite 518