Nortel-networks Sun Fire V100 Bedienungsanleitung PDF herunterladen (Seite 175)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide

Appendix C Verifying the installations

Verifying the database installation

The following commands are executed on the database Sun Fire V100

server using PuTTY SSH into the machine logical IP address.

Example: Open a PuTTY SSH session to 192.168.14.21, Port 22.

Procedure 51 Verifying the database server

At the management pc,

1 Log into the server as nortel/<new nortel user password>

2 After the MCS Base Platform System Software install, execute

the following command to verify IP addressing.

@mcsmcsdb]/export/home/nortel:=> ifconfig -a

lo0:

flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4>

mtu 8232 index 1 inet 127.0.0.1 netmask ff000000

dmfe0:

flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEP

RECATED,IPv4,NOFAILOVER> mtu 1500 index 2 inet

192.168.14.22 netmask ffffff00 broadcast 192.168.14.255

groupname imspub

dmfe0:1:

flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4

> mtu 1500 index 2 inet 192.168.14.21 netmask ffffff00

broadcast 192.168.14.255

dmfe1:

flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DE

PRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu

1500 index 3 inet 192.168.14.23 netmask ffffff00 broadcast

192.168.14.255 groupname imspub

3 Look for the entry that starts ‘dmfe0.’ The parameters that follow

show the IP address, subnet mask, and whether the interface is

‘UP.’ This example output shows that dmfe0 is assigned to IP

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 191 192

Keine Kommentare

Nortel-networks Sun Fire V100 Bedienungsanleitung Seite 175