Nortel-networks Sun Fire V100 Bedienungsanleitung PDF herunterladen (Seite 43)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide

Solaris Installation Program Page

1 Press Esc, then press the number 2 [Esc+2] to continue.

Note: If you are using a direct console connection to the SUN

terminal, use the F2 key.

2 Press Esc+2 to continue.

Network Connectivity/Networked

3 Accept the default Yes by pressing Esc+2 to continue.

DHCP/Use DHCP

4 Accept the default No by pressing Esc+2 to continue.

Primary Network Interface /Primary Network Interface

5 Accept the default dmfe0 interface by pressing Esc+2 to

continue.

Host name/Host name

6 Enter the host name of the server, for example: db

Note 1: Host name cannot start with a number. Host names

must be at least two characters and can contain alphanumeric

characters and minus signs (-).

Note 2: Host names must be unique within your domain.

Creating a duplicate host name will cause problems on the

network after you install Solaris.

Press Esc+2 to continue.

IP Address

Enter the machine logical IP address.

Example: 192.168.14.21

Press Esc+2 to continue.

ATTENTION

Make sure you enter the machine logical IP address for this

system. It must be unique and follow your site’s address

conventions.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 191 192

Keine Kommentare

Nortel-networks Sun Fire V100 Bedienungsanleitung Seite 43