Nortel Networks 24T Bedienungsanleitung PDF herunterladen (Seite 244)

Using the BayStack 410-24T 10BASE-T Switch

3-106

309985-B Rev 00

Configuration File

The Configuration File Download/Upload screen (Figure 3-44) allows you to

store your switch/stack configuration parameters on a TFTP server.

You can retrieve the configuration parameters of a standalone switch or an entire

stack and use the retrieved parameters to automatically configure a replacement

switch or stack. Certain requirements apply when automatically configuring a

switch or stack using this feature (see “

Requirements” on page 3-107). You must

set up the file on your TFTP server and set the filename read/write permission to

Enabled before you can save the configuration parameters.

Although most configuration parameters are saved to the configuration file,

certain parameters are not saved (see Table 3-40

on page 3-108).

Choose Configuration File (or press g) from the main menu to open the

Configuration File Download/Upload screen.

Figure 3-44. Configuration File Download/Upload Screen

Table 3-39 describes the Configuration File Download/Upload screen fields:

Configuration File Download/Upload

Configuration Image Filename: [ ]

TFTP Server IP Address: [ xxx.xxx.xxx.x ]

Copy Configuration Image to Server: [ No ]

Retrieve Configuration Image from Server: [ No ]

Enter text, press <Return> or <Enter> when complete.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 309 310

Keine Kommentare

Nortel Networks 24T Bedienungsanleitung Seite 244